The Actril® Residual Test Strips confirm that the concentrations of Actril® Cold Sterilant have been reduced to safe levels during rinsing procedures. Presented in a convenient 100-strip vial
Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitization of your high purity water system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/fail measurement of Minncare solution.
An immersion test strip and reading indicating the minimum peracetic acid level at 500 ppm after storage and before rinsing for clinical use. Perassay 500 Peracetic Acid Test Strips provide an easy, fast and convenient means of determining peracetic acid levels. The test is designed to indicate peracetic acid in concentrations of 500 ppm or more. Peracetic acid concentrations of…
Test for residual peroxide in rinse solution. Tests for a quantitative measure of Peroxide concentration after rinse-out. This test is sensitive to one part per million. 100 per vial. Features: 5 second read time.
Tests for a quantitative measure of Renalin® concentration after rinse-out. This test is sensitive to one part per million. 100 per vial. Features: 5 second read time.
The Renatest Steam Detection System helps maintain staff safety and compliance with OSHA and CMS standards. The kit contains a hand-held bellows pump and a tube cutter for use in conjunction with the detector tubes (sold separately). The hydrogen peroxide and acetic acid detector tubes come in a box and are used with the Renatest Deluxe bomb.